HARTING 09511210001

Product specifications

HARTING 09511210001: MPP-CC-IDC-ix-10p-M-P-STR A-cod AWG28-26; Connectors; Connector sets; IDC insulation displacement termination; Rated current: 1.5 A; Contacts: 8 + 2x GND; Copper alloy; PdNi ≥ 0.64 µm + Au ≥ 0.05 µm over Ni ≥ 2.6 µm Mating side, Sn ≥ 3 µm over Ni ≥ 1.8 µm Termination side; PushPull; Material: Polybutylene terephthalate (PBT) / PA66; Degree of protection: IP65 / IP67

Manufacturer

HARTING

Manufacturer part number

09511210001

Product type

Connector sets

Conductor cross-section (mm²)

0.09 ... 0.14 mm²

Conductor cross-section (AWG)

AWG 28 ... AWG 26

Wire outer diameter

≤1.2 mm

Rated voltage

50 V AC; 60 V DC

Rated current

1.5 A; 3 A per contact when used with 4 contacts (1,2,6,7)

Insulation resistance

>100 MΩ

Contact resistance

≤ 30 mΩ

Shielding resistance

≤ 100 mΩ

Limiting temperature

-40 ... +70 °C

Storage temperature

-60 ... +85 °C

Relative humidity

95 % Non-condensing (operation); 95 % Non-condensing (storage/transport)

Mating cycles

≥ 750

Degree of protection acc. to IEC 60529

IP65 / IP67

Cable diameter

5.5 ... 7.5 mm

Test voltage Ur.m.s.

0.5 kV (contact-contact); 0.5 kV (contact-shielding)

Transmission characteristics

Cat. 6_A Class E_A up to 500 MHz

Data rate

10 Mbit/s; 100 Mbit/s; 1 Gbit/s; 2.5 Gbit/s; 5 Gbit/s; 10 Gbit/s

Vibration resistance

10-500 Hz, 5 g, 0.35 mm, 2h/axis; 5.72 m/s² acc. to IEC 61373 Category 1 Class B

Shock resistance

50 g / 11 ms, 3 shocks / axis and direction; 5 g / 30 ms, 5 shocks / axis and direction acc. to IEC 61373 Category 1 Class B

Termination method

IDC insulation displacement termination

Locking type

PushPull

Shielding

Fully shielded, 360° shielding contact

Number of contacts

8

further contacts

+ 2x GND

Coding

Type A

Pack contents

incl. housing, HARTING ix Industrial®-connector type A, shielding and cable gland

ECHA SCIP number

5b0b428a-c671-4c90-9b6d-16804ea5737a

Fire protection on railway vehicles

EN 45545-2 (2020-08) + A1 (2023-10)

China RoHS

e

RoHS

compliant

REACH SVHC substances

Not contained

REACH Annex XVII substances

Not contained

REACH ANNEX XIV substances

Not contained

Requirement set with Hazard Levels

R26

ELV status

compliant

California Proposition 65 substances

Yes; Nickel

PFAS

Yes

PFAS substances

Potassium 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulphonate

Material (insert)

Polyamide (PA)

Material (shielding)

Stainless steel; Ni ≥ 1.6 µm Mating side (shielding); Sn ≥ 0.9 µm over Ni ≥ 0.9 µm Termination side (shielding)

Include in your enquiry

• Exact part number, version and required quantity
• Existing equipment and compatibility requirements
• Delivery destination and target date

Confirm the required version and compatibility before ordering. Your quotation will specify the proposed equipment and commercial terms.