HARTING
HARTING 21033412425
Cable connector; Panel feed through · Connectors & accessories
Product specifications
HARTING 21033412425: PFT M12 shielded Harax B-cod.Female; Cable connector, Panel feed through; for rear mounting; Female; B-coding; HARAX® connection technology; Polyamide (PA); Contacts: 2; Brass Au over Ni Mating side; Conductor cross-section: 0.25 ... 0.34 mm²; Rated current: 4 A; Zinc die-cast; Screw locking; Degree of protection: IP65 / IP67 mated condition
- Manufacturer
- HARTING
- Manufacturer part number
- 21033412425
- Product type
- Cable connector; Panel feed through
- Conductor cross-section (mm²)
- 0.25 ... 0.34 mm²
- Conductor cross-section (AWG)
- AWG 24 ... AWG 22
- Wire outer diameter
- ≤ 2.6 mm
- Rated current
- 4 A
- Rated voltage
- 32 V
- Rated impulse voltage
- 1.5 kV
- Pollution degree
- 3
- Insulation resistance
- >10^8 Ω
- Contact resistance
- ≤ 10 mΩ
- Limiting temperature
- -40 ... +85 °C
- Tightening torque
- 2 Nm Lock nut
- Mating cycles
- ≥ 100
- Degree of protection acc. to IEC 60529
- IP65 / IP67 mated condition
- Cable diameter
- 7 ... 8.8 mm
- Overvoltage category
- III
- Isolation group
- I (600 ≤ CTI)
- Thickness of the panel
- 2.5 ... 4.5 mm
- Termination method
- HARAX® connection technology
- Locking type
- Screw locking
- Gender
- Female
- Shielding
- Shielded
- Number of contacts
- 2
- Coding
- B-coding
- ECHA SCIP number
- 0d7d3693-d625-47ab-934a-d241bf72c86e
- Fire protection on railway vehicles
- EN 45545-2 (2020-08) + A1 (2023-10)
- China RoHS
- 50
- RoHS
- compliant with exemption
- REACH SVHC substances
- Yes; Lead
- REACH Annex XVII substances
- Not contained
- REACH ANNEX XIV substances
- Not contained
- Requirement set with Hazard Levels
- R26
- ELV status
- compliant with exemption
- California Proposition 65 substances
- Yes; Lead; Nickel
- RoHS exemptions
- 6(c): Copper alloy containing up to 4 % lead by weight
- PFAS
- Yes
- PFAS substances
- Fluoroelastomers
- Material (insert)
- Polyamide (PA)
- Material (contacts)
- Brass
- Surface (contacts)
- Au over Ni Mating side
- Material (hood/housing)
- Zinc die-cast
Include in your enquiry
- Exact part number, version and required quantity
- Existing equipment and compatibility requirements
- Delivery destination and target date
Confirm the required version and compatibility before ordering. Your quotation will specify the proposed equipment and commercial terms.
Browse HARTING products