HARTING
HARTING 21038811426
Cable connector; Panel feed through · Connectors & accessories
Product specifications
HARTING 21038811426: M12 SD PFT Male D cod 4 pol; Cable connector, Panel feed through; for rear mounting; Male; D-coding; Crimp termination; Liquid crystal polymer (LCP); Contacts: 4; Conductor cross-section: 0.13 ... 0.82 mm²; Rated current: 4 A; Zinc die-cast; Screw locking, PushPull; Degree of protection: IP65 / IP67 mated condition
- Manufacturer
- HARTING
- Manufacturer part number
- 21038811426
- Product type
- Cable connector; Panel feed through
- Conductor cross-section (mm²)
- 0.13 ... 0.82 mm²
- Conductor cross-section (AWG)
- AWG 26 ... AWG 18
- Wire outer diameter
- ≤ 2.3 mm
- Rated voltage
- 48 V AC; 60 V DC
- Rated current
- 4 A
- Rated impulse voltage
- 1.5 kV
- Pollution degree
- 3
- Insulation resistance
- >10^8 Ω
- Contact resistance
- ≤ 10 mΩ
- Limiting temperature
- -40 ... +85 °C
- Tightening torque
- 2 Nm Lock nut
- Mating cycles
- ≥ 500
- Degree of protection acc. to IEC 60529
- IP65 / IP67 mated condition
- Cable diameter
- 5.7 ... 8.8 mm
- Transmission characteristics
- Cat. 5 Class D up to 100 MHz
- Overvoltage category
- III
- Isolation group
- I (600 ≤ CTI)
- Data rate
- 10 Mbit/s; 100 Mbit/s
- Termination method
- Crimp termination
- Locking type
- Screw locking; PushPull
- Gender
- Male
- Shielding
- Shielded
- Number of contacts
- 4
- Coding
- D-coding
- Details
- Please order crimp contacts separately.; For Fast Ethernet applications only
- Fire protection on railway vehicles
- EN 45545-2 (2020-08) + A1 (2023-10)
- China RoHS
- e
- RoHS
- compliant
- REACH SVHC substances
- Not contained
- REACH Annex XVII substances
- Not contained
- REACH ANNEX XIV substances
- Not contained
- Requirement set with Hazard Levels
- R26
- ELV status
- compliant
- California Proposition 65 substances
- Yes; Lead; Nickel
- PFAS
- No
- Material (insert)
- Liquid crystal polymer (LCP)
- Material (hood/housing)
- Zinc die-cast
- Specifications
- IEC 61076-2-101; IEC 61076-2-010
- Category
- Connectors
- Identification
- Slim Design
Include in your enquiry
- Exact part number, version and required quantity
- Existing equipment and compatibility requirements
- Delivery destination and target date
Confirm the required version and compatibility before ordering. Your quotation will specify the proposed equipment and commercial terms.
Browse HARTING products