HARTING 21038812807

Product specifications

HARTING 21038812807: M12 SD female X cod 8 pol crimp flange; Cable connector; Straight; Female; X-coding; Crimp termination; Liquid crystal polymer (LCP); Contacts: 8; Conductor cross-section: 0.08 ... 0.25 mm²; Rated current: 0.5 A; Zinc die-cast; Screw locking; Degree of protection: IP65 / IP67 mated condition

Manufacturer

HARTING

Manufacturer part number

21038812807

Product type

Cable connector

Conductor cross-section (mm²)

0.08 ... 0.25 mm²

Conductor cross-section (AWG)

AWG 28 ... AWG 23

Wire outer diameter

≤ 1.4 mm

Rated current

0.5 A

Rated voltage

48 V

Rated impulse voltage

0.8 kV

Pollution degree

3

Insulation resistance

>10^8 Ω

Contact resistance

≤ 10 mΩ

Limiting temperature

-40 ... +85 °C

Tightening torque

0.6 Nm

Wrench size (knurled screw / knurled nut)

15

Mating cycles

≥ 500

Degree of protection acc. to IEC 60529

IP65 / IP67 mated condition

Transmission characteristics

Cat. 6_A Class E_A up to 500 MHz

Overvoltage category

III

Isolation group

I (600 ≤ CTI)

Data rate

10 Mbit/s; 100 Mbit/s; 1 Gbit/s; 2.5 Gbit/s; 5 Gbit/s; 10 Gbit/s

Termination method

Crimp termination

Locking type

Screw locking

Gender

Female

Shielding

Shielded; Shield connection with crimp flange

Number of contacts

8

Coding

X-coding

Details

Please order crimp contacts separately.; Please order crimp flange set separately.; For Ethernet applications up to 10 Gbit only

ECHA SCIP number

0d7d3693-d625-47ab-934a-d241bf72c86e

Fire protection on railway vehicles

EN 45545-2 (2020-08) + A1 (2023-10)

China RoHS

50

RoHS

compliant with exemption

REACH SVHC substances

Yes; Lead

REACH Annex XVII substances

Not contained

REACH ANNEX XIV substances

Not contained

Requirement set with Hazard Levels

R22 (HL 1-3); R23 (HL 1-3)

ELV status

compliant with exemption

California Proposition 65 substances

Yes; Lead; Nickel

RoHS exemptions

6(c): Copper alloy containing up to 4 % lead by weight

PFAS

No

Material (insert)

Liquid crystal polymer (LCP)

Material (hood/housing)

Zinc die-cast

Specifications

IEC 61076-2-109

Include in your enquiry

• Exact part number, version and required quantity
• Existing equipment and compatibility requirements
• Delivery destination and target date

Confirm the required version and compatibility before ordering. Your quotation will specify the proposed equipment and commercial terms.