HARTING
HARTING 97000006732
Cable connector · Connectors & accessories
Product specifications
HARTING 97000006732: ix_CC_10_A_1_2_MA_A1_IDC_28-26_100pc; Connectors; Cable connector Angled bottom; IDC insulation displacement termination; Rated current: 1.5 A; Contacts: 8 + 2x GND; Copper alloy; Au ≥ 0.2 µm over Ni ≥ 2 µm Mating side, Au ≥ 0.03 µm over Ni ≥ 2 µm Termination side; Material: Polycarbonate (PC); Degree of protection: IP20
- Manufacturer
- HARTING
- Manufacturer part number
- 97000006732
- Product type
- Cable connector
- Conductor cross-section (AWG)
- AWG 28/7 ... AWG 26/7
- Wire outer diameter
- 0.95 ... 1.05 mm
- Rated voltage
- 50 V AC; 60 V DC
- Rated current
- 1.5 A; 3 A per contact when used with 4 contacts (1,2,6,7)
- Insulation resistance
- >500 MΩ
- Contact resistance
- ≤ 30 mΩ
- Shielding resistance
- ≤ 100 mΩ
- Limiting temperature
- -40 ... +85 °C
- Storage temperature
- -30 ... +60 °C
- Relative humidity
- 95 % Non-condensing (operation); 95 % Non-condensing (storage/transport)
- Insertion force
- ≤ 25 N
- Withdrawal force
- ≤ 25 N
- Mating cycles
- ≥ 5,000
- Degree of protection acc. to IEC 60529
- IP20
- Cable diameter
- 5.5 ... 7.2 mm
- Test voltage Ur.m.s.
- 2.5 kV
- Transmission characteristics
- Cat. 6_A Class E_A up to 500 MHz
- Data rate
- 10 Mbit/s; 100 Mbit/s; 1 Gbit/s; 2.5 Gbit/s; 5 Gbit/s; 10 Gbit/s
- Retention force
- ≥80 N locking
- Termination method
- IDC insulation displacement termination
- Shielding
- Fully shielded, 360° shielding contact
- Number of contacts
- 8
- further contacts
- + 2x GND
- PE contact
- No
- Coding
- Type A
- Fire protection on railway vehicles
- EN 45545-2 (2020-08) + A1 (2023-10)
- China RoHS
- e
- RoHS
- compliant
- REACH SVHC substances
- Not contained
- REACH Annex XVII substances
- Not contained
- REACH ANNEX XIV substances
- Not contained
- Requirement set with Hazard Levels
- no requirements (flammable mass < 10g)
- ELV status
- compliant
- California Proposition 65 substances
- Not contained
- PFAS
- Yes
- PFAS substances
- Potassium 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulphonate
- Material (insert)
- Polyamide (PA)
- Material (shielding)
- Stainless steel; Ni ≥ 1 µm Termination side (shielding case); Ni ≥ 0.2 µm Termination side (shielding shell)
- Colour (insert)
- Black
- Material (contacts)
- Copper alloy
Include in your enquiry
- Exact part number, version and required quantity
- Existing equipment and compatibility requirements
- Delivery destination and target date
Confirm the required version and compatibility before ordering. Your quotation will specify the proposed equipment and commercial terms.
Browse HARTING products